The Installers Choice for HDMI Products in New Zealand.
The HDMI-SPLIT2H is designed to accept up to 1 HDMI source and connect up to 2 HDMI outputs, such as TV's, projectors and so on. The transmitters fully comply with HDMI 1.4 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify which outputs are connected.
- 1 HDMI input split to 2 multi HDMI display sink
- HDMI version 1.4 with latest full performance, HDCP 1.2 compliant
- FullHD 1080p/120Hz, 24fps
- Support VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920x1200)
- Standard 36bit colour (RGB/YCbCr) and new xvYCC colour space
- 2 Multi-layers cascading @ full HD 1080p
- DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format
- 3D support
- High speed with chipset bandwidth 2.25Gbps/channel, 6.75Gbps total
Our Code: HDMI-SPLIT2H
Click here to order now
The HDMI-SPLIT4H is designed to accept up to 1 HDMI source and connect up to 4 HDMI outputs, such as TV's, projectors and so on. The transmitters fully comply with HDMI 1.4 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify which outputs are connected.
- 1 HDMI input split to 4 Multi HDMI display sink
- HDMI version 1.4 with latest full performance, HDCP 1.2 compliant
- High Speed with chipset bandwidth 2.25Gbps/channel, 6.75Gbps total
- FullHD 1080p/120Hz, 24fps
- Support VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920x1200)
- Standard 36 bit colour (RGB/YCbCr) and new xvYCC colour space
- DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format
- 3D Support
- 2 Multi-layers cascading @ full HD 1080p
Our Code: HDMI-SPLIT4H
Click here to order now
Applications:
The HDMI-SPLIT8H is designed to accept up to 1 HDMI source and connect up to 8 HDMI outputs, such as TV's, projectors and so on. The transmitters fully comply with HDMI 1.4 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify which outputs are connected.
- 1 HDMI input split to 8 Multi HDMI display sink
- HDMI version 1.4 with latest full performance, HDCP 1.2 compliant
- High Speed with chipset bandwidth 2.25Gbps/channel, 6.75Gbps total
- FullHD 1080p/120Hz, 24fps
- Support VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920x1200)
- Standard 36 bit colour (RGB/YCbCr) and new xvYCC colour space
- DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format
- 3D Support
- 2 Multi-layers cascading @ full HD 1080p
Our Code: HDMI-SPLIT8H
Click here to order now
Applications:
The HDMI-MATRIX2X4H is designed to accept up to 2 HDMI sources and connect up to 4 HDMI outputs, such as TV's, projectors and so on. The output signals can be the same or different. The transmitters fully comply with HDMI 1.4 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify which inputs are connected. When you select an output the LED indicator will show which outputs are active.
- 2 HDMI input split to 4 Multi HDMI display sink (any input to any output)
- HDMI version 1.4 with latest full performance, HDCP 1.2 compliant
- High Speed with chipset bandwidth 2.25Gbps/channel, 6.75Gbps total
- FullHD 1080p, 24fps 50/60Hz, Deep colour 30bit/36bit
- Support VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920x1200)
- Standard 24 bit colour (RGB/YCbCr) and new xvYCC colour space
- DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format
- Comes with Remote Control
- IR repeater function built-in
- 3D Support
- Multi-layers cascading
Our Code: HDMI-MATRIX2X4H
Click here to order now
Applications:
The HDMI-MATRIX4X2H is designed to accept up to 4 HDMI sources and connect up to 2 HDMI outputs, such as TV's, projectors and so on. The output signals can be the same or different. The transmitters fully comply with HDMI 1.4 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify which inputs are connected. When you select an output the LED indicator will show which outputs are active.
- 4 HDMI input split to 2 Multi HDMI display sink (any input to any output)
- HDMI version 1.4 with latest full performance, HDCP 1.2 compliant
- High Speed with chipset bandwidth 2.25Gbps/channel, 6.75Gbps total
- FullHD 1080p, 24fps 50/60Hz, Deep colour 30bit/36bit
- Support VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920x1200)
- Standard 24 bit colour (RGB/YCbCr) and new xvYCC colour space
- DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format
- Comes with Remote Control
- IR repeater function built-in
- 3D Support
- Multi-layers cascading
Our Code: HDMI-MATRIX4X2H
Click here to order now
Applications:
The HDMI-MATRIX4H is designed to accept up to 4 HDMI sources and connect up to 4 HDMI outputs, such as TV's, projectors and so on. The output signals can be the same or different. The transmitters fully comply with HDMI 1.4 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify which inputs are connected. When you select an output the LED indicator will show which outputs are active.
- 4 HDMI input split to 4 Multi HDMI display sink (any input to any output)
- HDMI version 1.4 with latest full performance, HDCP 1.2 compliant
- High Speed with chipset bandwidth 2.25Gbps/channel, 6.75Gbps total
- Full HD 1080p/120Hz, 24fps
- Support VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920x1200)
- Standard 24 bit colour (RGB/YCbCr) and new xvYCC colour space
- DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD audio format
- Comes with Remote Control (supports RS232 IR control with supplied software)
- IR repeater function built-in
- 3D Support
Our Code: HDMI-MATRIX4H
Click here to order now
Applications:
Use the HDMI-REPT1.4H to extend the length of your HDMI cables, it is ideal to correct signal losses over longer distance HDMI cables.
- Extends the length of any HDMI cable by regenerating the HDMI signal before it outputs to the HDMI Displays
- Clean out the digital noise (sparkles) in your displays
- Maximum input 20 Meters; Maximum output 20 Meters over HDMI cables
- No Power Supply required
Our Code: HDMI-REPT1.4H
Click here to order now
Applications:
The HDMI-CAT5-30M is designed to transmit an HDMI source signal via two cat5e/cat6 cables and connect an HDMI outputs, such as TV’s, projectors and so on. The transmitters fully comply with HDMI 1.3 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify when output is connected.
- 1 HDMI input to 1 HDMI display sink
- 30mtr for 1080p, Super IR control system, forward or backward
- Easy installation with standard TIA/EIA568B cable wiring
- Sender converts HDMI signal to cat5e TMDS signal automatically
- Receiver has automatic signal equalizer (40db) \ clock phase adjustment (6db) \ feedback amplification adjustment (12db)
- Extend HDMI transmission over cat5e/6 wires upto 30mtr length with support for HDMI 1080p
- Requires 2 x cat5e or cat6 Cables
- No Power Supply required
Our Code: HDMI_CAT5_30M
Click here to order now
Applications:
The HDMI-CAT5-50M is designed to transmit an HDMI source signal via two cat5e/cat6 cables and connect an HDMI outputs, such as TV’s, projectors and so on. The transmitters fully comply with HDMI 1.3 standard and HDCP compliance. HPD (hot plug detect) circuit with LED indicators to identify when output is connected.
- 50mtr for 1080p, Super IR control system, forward or backward
- Easy installation with Standard TIA/EIA568B cable wiring
- Sender converts HDMI signal to cat5e TMDS signal automatically
- Receiver has automatic signal equalizer (40db) \ clock phase adjustment (6db) \ feedback amplification adjustment(12db)
- Extend HDMI transmission over two cat5e/6 wires 50mtr length with support for HDMI 1080p (upto 90mtr Max, 1080i)
- HDMI resolution: 1080p24fs/1080P/1080i/720P/576P/576i/480P/480i
- Video colour: 24bit(cat6), 36bit deep colour (cat7)
- Audio: DTS-HD/dobby-true-HD / LPCM7.1/AC3/DTS/DSD
- Speed: 5.1Gbps (cat6/cat5e), 6.75Gbps (cat7)
Our Code: HDMI_CAT5_50M
Click here to order now
Applications:
The HDMI-WIRE30H is designed to transmit an HDMI source signal wirelessly and connect an HDMI output, such as TV’s, projectors and so on. Ideal for use where cables cannot be run. The transmitter fully comply with HDMI 1.3 and HDCP 1.2 standard.
- HDMI over Wireless WHDI technology
- IR backward control
- Un-compressed Picture transmission with no jitter or pixilation
- 5G frenquency, strong capability to pass though walls (limited range with concrete walls)
- Instant wireless HD A/V transmission
- Transmission range in open indoor environment up to 30mtr
- Supports HDMI video at a maximum of 1080P @ 60Hz
- Supports HDMI1.3 & HDCP1.2 protocols
- Supports EDID function
- Supports the IR extension transmission function
- Supports the reverse back-transmission channel at the maximum rate of 100 kbs
- Supports OSD display
- Supports IEEE 802.11.n specifications
- Power Supplies included
- One HDMI lead required each at end (not supplied). LDPL414 Recommended.
TRANSMITTER:
Transmit Frequency: 5150~5350MHz & 5650~5725MHz
Frequency stability: +/- 4PPM
Bandwidth: 40MHz
Transmission Power: 12dBm
Receiving Sensitivity: -75dBm
System Latency: 1ms
HD video protocol: HDMI 1.3
HD video encryption protocol: HDCP 1.2
Unobstructed Effective Range: 30mtr
Power Supply: 5V (SMPS5V2A)
Consumption Current: 2A +/-10%
Dimensions (WxDxH): 148x97x18(mm)
Approx.Weight: 440gm (including base)
RECEIVER:
Receiving Frequency: 5150~5350MHz & 5650~5725MHz
RF communication system: MIMO
Modulation mode: OFDM
Frequency stability: +/-4PPM
Bandwidth: 40MHz
Transmission Power: 15dBm
Receiving Sensitivity: -65dBm
System latency: 1ms
HD video protocol: HDMI 1.3
HD video encryption protocol: HDCP 1.2
Unobstructed Effective Range: 30mtr
Power Supply: 5V (SMPS5V2A)
Consumption Current: 2A +/-10%
Dimensions (WxDxH): 148x97x18 (mm)
Approx.Weight: 436gm (including base)
Operating Temperature: -10ø to +50ø
Storage Temperature: -20ø to +80ø
Operating Humidity: 15~85% RH
Our Code: HDMI-WIRE30H
Click here to order now
IR add-ons
Applications:
The IR add-ons listed below are designed to work with the HDMI-CAT5-30M, HDMI-CAT5-50M, HDMI-SPLIT2H, HDMI-SPLIT4H, HDMI-SPLIT8H, HDMI-MATRIX4H, HDMI-MATRIX2X4H, HDMI-MATRIX4X2H & HDMI-WIRE30H to increase their functionality by allowing the addition of IR Remote Control signals to be passed thru the system, eliminating the need for extra cables
- HDMI Female to Male Insertor Adapter for IR plug
- Accurate and reliable reproduction of digital video signal, with no signal attenuation or distortion
- Transport both audio and video signals
- Works with HDMI-IRADP20 & HDMI-IRADP30
Our Code: HDMI_IRADP10
Click here to order now
- Single band IR Sender
- Supporting 38KHz IR frequency
- 1.5mtr IR cable
- 3.5mm plug
- 3-5mtr sensitive (max 7mtr)
Our Code: HDMI_IRADP20
Click here to order now
- Single band IR Receiver
- Supporting 38KHz IR frequency.
- 1.5m IR cable
- 3.5mm plug
- 3-5mtr sensitive (max 7mtr)
Our Code: HDMI_IRADP30
Click here to order now
To request more information, pricing or to contact a sales representative at TradeTech.
