Click here for a list of Peak products kept in stock
Features:
Automatic component type identification.
Automatic pinout identification (Gate only on JFETs), connect the test leads any way round.
Gain measurement for transistors.
Leakage current measurement for transistors.
Gate threshold measurement for Enhancement mode MOSFETs.
Depletion mode/Enhancement mode detection for MOSFETs.
Forward voltage drop measurements of diodes, LEDs and transistor base-emitter junctions.
Base-emitter shunt resistor detection.
Collector-emitter diode detection.
Intelligent diode network descriptions.
Short circuit detection between any 2 or 3 junctions.
2 Line scrollable LCD.
Colour coded, universal clips, gold plated.
Simple two button control.
Auto and manual power-off.
Alkaline battery supplied.
Includes comprehensive illustrated user guide.
Only 103mm x 70mm x 20mm.
Components Supported:
Bipolar transistors
Diode protected transistors (C-E)
Resistor shunted transistors (B-E)
Darlingtons
Diodes
Diode Networks
Enhancement mode MOSFETs
Depletion mode MOSFETs
Junctions FETs (JFETs)
Sensitive Thyristors
Sensitive Triacs
LEDs and Bicolour LEDs
Our Code: TEPEAKTR
Click here to order now
The Atlas LCR automatically identifies
and analyses almost any passive component (Inductor, Capacitor or Resistor). It measures it's main parameters using automatically selected test frequencies (DC, 1kHz, 15kHz and 200kHz).
Inductors from 1uH to 10H
Capacitors from 1pF to 10,000uF
Resistors from 1 Ohm to 2Meg Ohm.
Features:
Basic accuracy is 1%
display resolution is typically 4 significant figures.
Universal test probes are detachable, allowing use of many different probe types including SMD tweezer probes, Croc Clips and Long Reach Grabbers.
Inductance resolution is as low as 0.4uH
Capacitance resolution is as low as 0.4pF
Resistance resolution is as low as 0.3 ohms
Our Code: TEPEAKLCR
Click here to order now
Measuring a capacitor's ESR (equivalent
series resistance) is a great indicator of capacitor condition. The Atlas ESR offers instant results, just connect the probes and press test. You can even use the Atlas ESR in-circuit, saving you the trouble of removing capacitors. When testing capacitors out-of-circuit, the unit will also display the capacitance.
Features:
Measure capacitance and ESR.
New enhanced dynamic range of 0.00 to 20.0 ohms.
ESR Resolution down to 0.01 ohms.
Supports capacitors from 1uF to 22,000uF.
Capable of In-Circuit measurement of ESR.
Polarity free, connect any way round.
Protected against highly charged capacitors.
Supplied complete with gold plated kelvin-wired crocs.
Test leads are ultra-flex 45cm (18”) long!
Complete with comprehensive user guide.
Capacitor reference table included.
Tests at the industry standard 100kHz.
Our Code: TEPEAKESR
Click here to order now
Features:
A comprehensive CAT 5/5e/6 network cable analyser. Easy to use and very fast.
Automatically identifies cable type (straight through, cross-over, token ring) and verifies all the connections.
Faults are clearly displayed and explained on screen.
Instructs you on making up special cables.
Comes in a handy carry case with connecting leads and terminators.
Our Code: TEPEAKNCA
Click here to order now
Features:
Measure capacitance and ESR.
New enhanced dynamic range of 0.00 to 20.0 ohms.
ESR Resolution down to 0.01 ohms.
Supports capacitors from 1uF to 22,000uF. - Capable of In-Circuit measurement of ESR.
Polarity free, connect any way round.
Protected against highly charged capacitors.
Supplied complete with gold plated kelvin-wired crocs.
Test leads are ultra-flex 45cm (18") long!
Complete with comprehensive user guide.
Capacitor reference table included.
Tests at the industry standard 100kHz.
Our Code: TEPEAKEDDI
Click here to order now
To request more information, pricing or to contact a representative at TradeTech regarding Peak Component Analysers.
