This is an ideal retrofit unit for controlling equipment in another room (say the SKY decoder from the bedroom). Using cat5 cable, you can extend the operation of the remote control by up to 300 metres using a simple pick and choose system to suit your environment. Buy the components separately: IRSEND50 + either IRSEND68, IRSEND69 or IRSEND64 + IRSEND75 and power supply, or as a KIT ready to go IRSENDKIT3.
Why use a hard wired IR extender? Simple, Wireless versions are becoming more and more difficult to use due to the frequencies of transmission being used by other products and the poor range that wireless transmission brings.
By using a hard wired version you can achieve distances of over 100 metres, (300 metres max) and also have control for up to 4 rooms.

Start with a control module ...

IR EXTENDER CONTROL MODULE (RPT-104-1)

Our Code: IRSEND50
- One screw connector for any IR receivers
- 4 IR-emitter output jacks
- One power input jack
- One status input jack
- cat5 cable to IR receivers up to 300 metres
- IR Repeater with 4 emitter outputs,
frequency response: 38 kHz
- Uses ADP12CR20 (not supplied) POWER
PACK (12V 500 mA - 2.1 x 5.5 x 11 mm PLUG)

Click here to order now

---

Our Code: IRSEND52
- cat5 EZI Install Socket for IRSEND50

Click here to order now

---

... add up to four receivers ...

IR EXTENDER RECEIVER MODULE (IRC-3099B22) STICK FORM

Our Code: IRSEND68
- cat5 3-conductor cable, terminated on EIA/TIA-568B RJ45 plug
- Bandwidth: 30~100 kHz
- Reception range: up to 10 metres depending on local conditions
- Cable length: 2 metres
- Plasma friendly
- Accommodates for GND, VDC & IR connections
- Works with most remote controls on the market
- Use cat5 cable to connect to control module up to 300 metres

Click here to order now

---

IR EXTENDER RECEIVER MODULE (IRT-309910L00) THRU HOLE FORM

Our Code: IRSEND69
- cat5 3-conductor cable, terminated on EIA/TIA-568B RJ45 plug
- Accommodates for GND, IR & VDC connections
- Reception range: up to 10 metres depending on local conditions
- Dimensions: 1/2" diameter x 2" deep
- Infrared modulation frequency bandwidth: 30~100 kHz
- Works with most remote controls on the market
- Use cat5 cable to connect to control module up to 300 metres

Click here to order now

---

IR EXTENDER RECEIVER MODULE (IRP-30990327W) WALL PLATE - WHITE

Our Code: IRSEND64
- Screw terminal connections
- Infrared frequency bandwidth: 30 ~ 100 KHz
- Reception range: up to 10m depending on local conditions
- Plasma friendly
- Flashing blue LED light confirms IR signal reception
- Works with most remote controls on the market
- Use cat5 cable to connect to control module up to 300 metres

Click here to order now

---

... plus up to four transmitters.

IR EXTENDER TRANSMITTER EYE MODULE (IEC-3502) DUAL EYE

Our Code: IRSEND75
• Dual infrared emitting diode
• Cable specification: 3 metre with
3.5 mm plug

Click here to order now

---

or buy a made up kit, ready to go.

IR EXTENDER KIT (1 ROOM EXTENDER)

Our Code: IRSENDKIT3
Includes one of each:
- IRSEND50 - IR EXTENDER CONTROL MODULE
- IRSEND52 - cat5 EZI INSTALL SOCKET
- IRSEND68 - STICK FORM IR EXTENDER RECEIVER MODULE
- IRSEND75 - DUAL EYE IR EXTENDER TRANSMITTER EYE MODULE
- POWER SUPPLY - 12V @ 1A DC REG POWER PACK

Click here to order now

Not included in Kit is cat5 cable (Our Code: CABCAT5E)